The Videofied Indoor Smoke Detector enhances protection and uses advanced optical detection technology.
ISD smoke detector is a wireless, battery-powered device design to be used with a Videofied security system. The detector is embedded with a smoke detection module, a buzzer and a radio module. Install the detector in the middle of the zone to protect. Installing the detector too close from a combustion source (kitchen with few windows or poorly ventilated, garage, furnace, hot water heaters, space heaters, etc.) or close to a humidity source (bathroom) can trigger false alarms. If the site has several floorsn install at least a smoke detector on every floor. The detector is powered by a 3V Duracell CR123A Lithium battery for a two year battery life (on average). When the ISD smoke detector triggers, it generates a sound alarm and the information Smoke Detection is sent to the monitoring station through the alarm panel.
> Push button recording.
> Optical detection of visible particles.
> S2View®— Spread Spectrum, Videofied, Interactive, AES
Encrypted Wireless technology provides optimum signal integrity
> Buzzer : 85 dB output level at 3 meters for up to 3 minutes in
> Supervised—transmits a check-in/status signal to the panel
every 8 minutes indicating unique identification code along
with the current detection sensor state, tamper condition, serial
number, manufacture date, software revision, and battery status.
> Dual tamper—provides cover and wall tamper detection.
> Lithium batteries—last up to four years depending on activity