The Keypad Model XMA/XMB is a battery operated, wireless alphanumeric keypad designed for configuring/programming and operating Videofied security systems.
The keypad model XMB has an integrated badge reader.
The Keypad Model XMA is a battery operated, wireless alphanumeric keypad device designed for programming and operating Videofied security systems. The keypad features a two line, 16 character liquid crystal (LCD display, multi-function push buttons, panic assistance, built-in sounder, and 2View® spread spectrum encrypted wireless circuitry for secure 868MHz/915MHz/920MHz two-way communication with the control panel. The LCD backlight turns off automatically after 30 seconds of keypad inactivity to conserve battery power. Pressing a button will turn the backlight on. The keypad can be used to program and configure Videofied security systems. S2View® spread spectrum encrypted wireless circuitry effectively makes the keypad a mobile programmer that can be used anywhere within the installation site during system programming. Because the keypad is a supervised device, once programming is completed the keypad must be permanently mounted or deleted from the system. The easy to understand display guides you through programming, prompting you for simple yes/no or data entry responses. The left and right arrow buttons cycle through menus or values until the desired option is displayed. Text entries are done using the 0 – 9 buttons and can be in lowercase, uppercase, or a combination of both. Complete punctuation symbols are also available for data entries
such as website/IP addresses and component location naming. The keypad is typically installed near entry/exit doors to allow system users enough time to arm and exit the premises, and to enter and disarm the system before time delay expires. When the system is armed, the built-in sounder emits a series of exit delay beeps to remind the user to exit before the beeps stop. Upon entering the armed premises, the built-in sounder emits entry delay beeps to remind the user to disarm the system to avoid an alarm. A dual tamper function provides detection for both keypad cover and wall tamper. The keypad is powered by three or four lithium batteries that can last up to four years or more, depending on the amount of keypad activity. The keypad transmits a check-in signal every eight minutes that includes its unique identification code, along with the tamper condition, serial number, date of manufacture, software revision and battery status. Videofied alarm systems support up to three keypads per system.
> S2View® – Spread Spectrum, Videofied, Interactive AES
Encrypted Wireless technology provides optimum signal integrity
> Mobility – program the system from anywhere on site.
> Display – Two line, 16 character display with automatic backlight.
30 second backlight timer to conserve battery power.
> Buttons – complete alphanumeric setting/parameter entries in
programming mode; standard and custom operation in normal
> Built-in sounder – provides entry/exit delay beeps and alarm
> Panic Assistance – for manual activation anytime.
> Supervised – transmits a check-in/status signal every 8 minutes
indicating tamper state, serial number, date of manufacture,
software revision and battery status.
> Dual tamper – provides detection for both wall and cover